Ducati Hyperstrada Forums Ducati Hyperstrada Motorcycle

Go Back   Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Ducati Hyperstrada

Ducati Hyperstrada Ducati Hyperstrada Motorcycle Forum: 2013-2015 Hyperstrada and 2016 Hyperstrada 939


Reply
 
LinkBack Thread Tools Display Modes
Old October 27th, 2016, 07:39 PM   #11
Senior Member
 
Joined: Sep 2016
From: ABQ NM
Posts: 118

I hear you on the black anodize. Thinking of the same for this and the mounts for the Givi Trekker cases I'm thinking of getting black anodize (I have them). Haven't decided yet.

Meanwhile, my heated grips are installed and the dealer (PJ's in ABQ NM) turned them on and didn't charge me to do it. Very cool of them. They've been great to deal with. These are nicer than my Beemer heated grips with more settings.

Working on hooking up GPS next, ordered correct connectors to plug into stock harness so I don't have to cut the connector off. Digikey has the connectors and pins and they are CHEAP. Here's part # if you want them:
1) connector housing - Digikey # 455-1205-ND (you'll need 1 of these)
2) pins - Digikey # 455-1321-1-ND (you'll need 2 of these)

Last edited by BadToTheBown; November 8th, 2016 at 07:29 PM.
BadToTheBown is online now   Reply With Quote
 
Old November 5th, 2016, 12:16 PM   #12
Senior Member
 
Joined: Sep 2016
From: ABQ NM
Posts: 118

Added case slider today and connector parts (fits stock Ducati connector) for GPS (Zumo 550) wiring arrived this week. I thought the case slider would somehow cover the water pump but I was wrong. It's R&G but I left the sticker off.
BadToTheBown is online now   Reply With Quote
Old November 5th, 2016, 12:18 PM   #13
Senior Member
 
Joined: Sep 2016
From: ABQ NM
Posts: 118

Forgot the photo...
Attached Thumbnails
HyperProject-caseslider1.jpg  
BadToTheBown is online now   Reply With Quote
Old November 7th, 2016, 03:30 PM   #14
Senior Member
 
Joined: Sep 2016
From: ABQ NM
Posts: 118

Didn't get to the GPS wiring today but did get my new EvoTech radiator and front cylinder head guards on. One word of caution, the lower third bolt to mount the front cylinder head guard, should be 20mm long. Although maybe you can get a 16mm (what it comes with) to work, you will not be engaging all the threads in the mounting nut with 16mm. 20mm gives a couple of threads past the nut (what you want).
BadToTheBown is online now   Reply With Quote
Old November 7th, 2016, 03:32 PM   #15
Senior Member
 
Joined: Sep 2016
From: ABQ NM
Posts: 118

Why I hit submit instead of attach....sorry about the rotation...
Attached Thumbnails
HyperProject-radnheadguards.jpg  
BadToTheBown is online now   Reply With Quote
Old November 7th, 2016, 03:33 PM   #16
Senior Member
 
Joined: Sep 2016
From: ABQ NM
Posts: 118

Also put my Stomp Grip on today...
Attached Thumbnails
HyperProject-stompgrip1.jpg  
BadToTheBown is online now   Reply With Quote
Old December 4th, 2016, 06:30 PM   #17
Senior Member
 
Joined: Sep 2016
From: ABQ NM
Posts: 118

OK, pulling the trigger on the Mupo fork and shock upgrade. I'm going the same way RSL went and with the same guy (I know Roger from the BMW R1100S Pelican forum board). I suspect the bike will be sitting for a couple of months... :-(
Attached Thumbnails
HyperProject-forksoff.jpg  
BadToTheBown is online now   Reply With Quote
Old February 9th, 2017, 08:05 PM   #18
Senior Member
 
Joined: Sep 2016
From: ABQ NM
Posts: 118

Forks are still being worked. Mupo all in but still waiting on coatings to finish. Meanwhile, more junk to install. Tonight a water pump slider and a Hammerhead shift lever with pivoting tip (just in case). This has the 10mm extension.
Attached Thumbnails
HyperProject-slider-waterpump.jpg   HyperProject-shiftlever-folding.jpg  
BadToTheBown is online now   Reply With Quote
Old March 9th, 2017, 04:52 PM   #19
Senior Member
 
Joined: Sep 2016
From: ABQ NM
Posts: 118

forks

Mupo is in, upper fork tubes are now black anodized (pic below) and still waiting for RaceTech to finish DLC'ing lower tubes. Then it's all ready to go together...
Attached Thumbnails
HyperProject-hyperforks-uppertubes-blkanodize.jpg  
BadToTheBown is online now   Reply With Quote
Old March 10th, 2017, 07:38 AM   #20
Senior Member
 
monocog007's Avatar
 
Joined: Oct 2015
From: Minnesota
Posts: 395

I Ride: 13' Hyperstrada, 00' M900Sie
Quote:
Originally Posted by BadToTheBown View Post
Mupo is in, upper fork tubes are now black anodized (pic below) and still waiting for RaceTech to finish DLC'ing lower tubes. Then it's all ready to go together...
This is awesome! Photos for sure when you're done.
monocog007 is offline   Reply With Quote
Reply

  Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Ducati Hyperstrada

Tags
hyperproject



Thread Tools
Display Modes



Ducati Hyperstrada Facebook Ducati Hyperstrada Twitter Ducati Hyperstrada RSS Feed



Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.