| |
March 10th, 2017, 05:30 PM
| #21 |
| Senior Member Joined: Sep 2016 From: ABQ NM Posts: 238 |
I will and now I have some cool aux lights to add as well... :-)
|
|  |
|
April 15th, 2017, 07:29 PM
| #22 |
| Senior Member Joined: Sep 2016 From: ABQ NM Posts: 238 |
I've been busy installing stuff. Finished the GPS wiring and added some for a radar detector. It's pretty tight behind that headlight...
|
|
| |
|
April 15th, 2017, 07:40 PM
| #23 |
| Senior Member Joined: Sep 2016 From: ABQ NM Posts: 238 |
Upgraded shift lever, went Hammerhead...
|
|
| |
|
April 15th, 2017, 07:43 PM
| #24 |
| Senior Member Joined: Sep 2016 From: ABQ NM Posts: 238 |
While I was waiting for my forks, got a little hard-up so I painted the front brake calipers...
|
|
| |
|
April 15th, 2017, 07:58 PM
| #25 |
| Senior Member Joined: Sep 2016 From: ABQ NM Posts: 238 |
Finished installing those beautiful aux lights...Really like these...Took Patrick's advice and soldered the wires...Had a fit putting the headlight back in, went for a 2" hole for the headlight connector...
Last edited by BadToTheBown; April 15th, 2017 at 08:01 PM. |
|
| |
|
April 15th, 2017, 08:09 PM
| #26 |
| Senior Member Joined: Sep 2016 From: ABQ NM Posts: 238 |
My suspension arrived yesterday. The forks are gorgeous, I really got carried away here...
|
|
| |
|
April 15th, 2017, 08:14 PM
| #27 |
| Senior Member Joined: Sep 2016 From: ABQ NM Posts: 238 |
Here's the installed pics...I like the forks all black...Now I'm wondering if I can reconfigure the shock so I can swap it around and put the heavy end to the frame and light end to the swingarm...Went for the cartridges in both forks which requires the left lower tube be removed to machine the brake/axle bracket to accept a cartridge...The rear is the Mupo EVO with a preloader...Word of wisdom on installing the rear shock, wasted the better part of 40 minutes TRYING to install the shock by putting in the frame bolt first, then the swingarm bolt, changed it up and took the frame bolt out, then started with the bolt in the swingarm and then the frame was easy...
Last edited by BadToTheBown; April 15th, 2017 at 08:38 PM. |
|
| |
|
April 15th, 2017, 08:20 PM
| #28 |
| Senior Member Joined: Sep 2016 From: ABQ NM Posts: 238 |
I have the snatchy clutch problem but not ready to buy a 2016 clutch...I'm trying the Rizmo lever with a readjustment (not spec)...
|
|
| |
|
April 15th, 2017, 08:33 PM
| #29 |
| Senior Member Joined: Sep 2016 From: ABQ NM Posts: 238 |
Also made some electrical changes while I was at it...went with a LiFe battery but all the new connections required little bus bars to relo it on top of the battery...added the following: 1) Aux lights (posted earlier) 2) Battery Jumper socket (I have mini jump cables) Added battery recharger cable to properly maintain the battery and relocated accessory plug because the new rear shock made the original shock reservoir mount that held it had to go...These were a royal PITA to relocate, Ducati didn't leave much room under that body work... |
|
| |
|
April 15th, 2017, 10:01 PM
| #30 |
| Senior Member Joined: Jul 2014 From: California Posts: 1,157 |
Wow, that suspension looks great. Love the black. You got nice SKF seals on there too, it looks like. Nice work on the headlight connector install. I couldn't even tell you modified it! |
|
| |
Linear Mode
