Ducati Hyperstrada Forums Ducati Hyperstrada Motorcycle

Go Back   Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Ducati Hyperstrada

Ducati Hyperstrada Ducati Hyperstrada Motorcycle Forum: 2013-2015 Hyperstrada and 2016-2017 Hyperstrada 939


Reply
 
LinkBack Thread Tools Display Modes
Old June 30th, 2019, 12:56 PM   #1
Member
 
thePUNISHER's Avatar
 
Joined: Jun 2017
From: Merced CA
Posts: 92

I Ride: '16 Hyperstrada 939
Shifter toe peg?!?

So just wondering if anyone can tell me if that part is available by itself or if I'll have to buy the whole shift lever assembly? Dropped the bike today. Thankfully the slider did it's job but there was some damage. See attached pics. I can get the whole assembly for around $120 but I was hoping to just get the little removable peg that goes on the end of the shift lever. I can't seem to find a part number for it though. Any help?




Last edited by thePUNISHER; June 30th, 2019 at 01:06 PM.
thePUNISHER is offline   Reply With Quote
 
Old June 30th, 2019, 01:18 PM   #2
Senior Member
 
Joined: Jul 2014
From: California
Posts: 1,236

I had the same thing happen on another bike of mine and I drilled and tapped a bolt into the lever and it worked for years!
kuksul08 is offline   Reply With Quote
Old June 30th, 2019, 02:03 PM   #3
Member
 
thePUNISHER's Avatar
 
Joined: Jun 2017
From: Merced CA
Posts: 92

I Ride: '16 Hyperstrada 939
Yeah I didn't realize it when I posted that the peg isn't a bolt on/removable part. It felt like there was an allen head bolt holding it on but apparently it's press fit in there? So my options are to replace the whole lever or drill a hole and bolt something off of ebay on there. I might just replace the whole lever and then keep/mod the old one and have it as a back up. Wish someone was selling a whole lever on ebay that would work but I can't seem to find one.
thePUNISHER is offline   Reply With Quote
Old June 30th, 2019, 02:41 PM   #4
Senior Member
 
Joined: Jun 2014
From: Boston
Posts: 916

I Ride: hyperstrada 821
I put on woodcraft foldable toe pegs. All you have to do is cut that nub off, drill a hole through the remaining "riveted" aluminum, and bolt on the woodcraft. You will need a slightly longer bolt. The metal is soft so cutting filing and driling is pretty much a cinch - I did remove the lever to do this.

https://www.revzilla.com/motorcycle/...ding-toe-piece
appliance821 is offline   Reply With Quote
Old June 30th, 2019, 02:49 PM   #5
Member
 
thePUNISHER's Avatar
 
Joined: Jun 2017
From: Merced CA
Posts: 92

I Ride: '16 Hyperstrada 939
Quote:
Originally Posted by appliance821 View Post
I put on woodcraft foldable toe pegs. All you have to do is cut that nub off, drill a hole through the remaining "riveted" aluminum, and bolt on the woodcraft. You will need a slightly longer bolt. The metal is soft so cutting filing and driling is pretty much a cinch - I did remove the lever to do this.

https://www.revzilla.com/motorcycle/...ding-toe-piece
Oh now that's an idea I like. Foldable in case of another drop it folds instead of breaks! Have you had any issues with it since install? No wonkiness, missed shifts, peg folding in when you're trying to shift on the fly?
thePUNISHER is offline   Reply With Quote
Old June 30th, 2019, 03:07 PM   #6
Senior Member
 
Joined: Sep 2016
From: ABQ NM
Posts: 308

Quote:
Originally Posted by appliance821 View Post
I put on woodcraft foldable toe pegs. All you have to do is cut that nub off, drill a hole through the remaining "riveted" aluminum, and bolt on the woodcraft. You will need a slightly longer bolt. The metal is soft so cutting filing and driling is pretty much a cinch - I did remove the lever to do this.

https://www.revzilla.com/motorcycle/...ding-toe-piece
+1 Done this on other bikes, works great...
BadToTheBown is offline   Reply With Quote
Old June 30th, 2019, 03:50 PM   #7
Senior Member
 
Joined: Jul 2014
From: California
Posts: 1,236

That's a great idea.
kuksul08 is offline   Reply With Quote
Old June 30th, 2019, 04:42 PM   #8
Member
 
thePUNISHER's Avatar
 
Joined: Jun 2017
From: Merced CA
Posts: 92

I Ride: '16 Hyperstrada 939
Well after 5 minutes with a hand file the nub has been ground off and the lever is now smooth. Going to order that toepeg and next weekend I'll center punch the lever, drill a small pilot hole, then enlarge the hole once the toepeg gets delivered so I know how big to make the hole. Thanks for the suggestions guys!
thePUNISHER is offline   Reply With Quote
Old June 30th, 2019, 04:58 PM   #9
Member
 
thePUNISHER's Avatar
 
Joined: Jun 2017
From: Merced CA
Posts: 92

I Ride: '16 Hyperstrada 939
Oh and aside from the drop I did have a nice ride today. I was actually surprised I didn't miss more shifts after the lever broke lol.




I love that in this pic you can see the road cut into the side of the mountain way off in the distance.







What you can't tell from these last 3 pictures is that the ground is sloped down from left to right. When I went to leave I was going up over a rise and then down to my left back out to the road. Unfortunately I gave it too much gas, lost traction in the dirt/gravel, lost my balance and went down on the left side. Thus causing the problem I have now, a few damaged parts and a bruised ego lol.





thePUNISHER is offline   Reply With Quote
Old June 30th, 2019, 05:09 PM   #10
Senior Member
 
Joined: Sep 2016
From: ABQ NM
Posts: 308

Quote:
Originally Posted by thePUNISHER View Post
..I'll center punch the lever, drill a small pilot hole...
Check the inboard side of the rivet that held the old peg on, think it has an already perfectly centered pilot to start with...
BadToTheBown is offline   Reply With Quote
Reply

  Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Ducati Hyperstrada

Tags
peg, shifter, toe


« Center stand off | - »

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ceramic bearings pivot shifter mod Araitim Mechanical and Technical 1 May 27th, 2019 03:43 PM
Chinese shifter modified with a homemade billet arm Araitim Mechanical and Technical 0 June 2nd, 2018 05:52 PM
New gear shifter SamUk New Users 15 April 30th, 2016 05:26 PM


Ducati Hyperstrada Facebook Ducati Hyperstrada Twitter Ducati Hyperstrada RSS Feed



Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.