Ducati Hyperstrada Forum

Ducati Hyperstrada Forum (http://hyperstrada.com/ducati-hyperstrada-forums.php)
-   Ducati Hyperstrada (http://hyperstrada.com/ducati-hyperstrada/)
-   -   How do you remove the stock horn? (http://hyperstrada.com/ducati-hyperstrada/632-how-do-you-remove-stock-horn.html)

HyperstradaHopeful February 15th, 2014 06:16 PM

How do you remove the stock horn?
 
Looks like it's held in by rivets or something. No screws. Anyone have any idea how to get it out of there?

http://cl.ly/image/0Y210E3J093S/photo.JPG

suprphreak February 15th, 2014 06:59 PM

I see a nut on the right of that picture. Undo that, drop it out, and there should be a screw behind the horn. Re and re after that.

Momfer February 15th, 2014 10:08 PM

There is a bolt. When you look a bit to the left of where the black taped part of the electrical wire ends and gets 2 single wires. You see the threaded end of the bolt.
A bit tricky to access.

HyperstradaHopeful February 16th, 2014 06:39 AM

Quote:

Originally Posted by Momfer (Post 6714)
There is a bolt. When you look a bit to the left of where the black taped part of the electrical wire ends and gets 2 single wires. You see the threaded end of the bolt.
A bit tricky to access.

That's a bolt that's screwed in from the back? Are you sure? Looked a lot like a smooth flush head. I'll head to go back down and take an even closer look with a flashlight.

Why would the bolt be screwed in from the back and not the front where it's more easily accessible?

Momfer February 16th, 2014 07:20 AM

I took the horn off myself, it is the right one.
They (Ducati) mount the horn from the back. Only one bolt in stead of 4 screws and one bolt.

Pinoybear March 6th, 2014 03:32 PM

Has anyone replaced the stock horn with a FIAMM horn like this one: http://amzn.com/B000DINKPQ

If so, does it fit where the stock horn does without causing issues refitting the nose fairing?

TIA,
Eric

phantomfighter March 7th, 2014 02:44 AM

The OEM horn is in a tiny space. Your best to rewire and place somewhere else.

Momfer March 7th, 2014 05:59 AM

Quote:

Originally Posted by Pinoybear (Post 7204)
Has anyone replaced the stock horn with a FIAMM horn like this one: FIAMM 72112 Freeway Blaster Horn : Amazon.com : Automotive

If so, does it fit where the stock horn does without causing issues refitting the nose fairing?

TIA,
Eric

Yep, did that and it just (hardly) fits.
It is easier when you take the nose fearing of like the picture above.


All times are GMT -8. The time now is 11:16 PM.


Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.