Ducati Hyperstrada Forums Ducati Hyperstrada Motorcycle

Go Back   Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Gear

Gear Motorcycle Gear Forum - For motorcycle riding gear


Reply
 
LinkBack Thread Tools Display Modes
Old April 23rd, 2017, 02:05 PM   #1
Member
 
Joined: Jul 2016
From: Ontario, Canada
Posts: 57

I Ride: 2005 749, 2015 Hyperstrada
Givi DIY mounts

So I am preparing for a longer trip an thought I may do the sensible thing and get me some nice cases for the trip. Seeing that the mounting solutions were few I went back to the garage and fabbed some stuff.
This is version 1 ... the plate is pretty close to the original mounts and I've just mocked it up with some washers as rough spacers ... the Givi E22 just barely touches the OEM rear blinker ... don't think this is going to be a problem ... but I may just add some larger spacers similar to the OEM round knobs ...

Thoughts, comments, concerns, advice?

Migrane
Attached Thumbnails
Givi DIY mounts-img_3173.jpg   Givi DIY mounts-img_3174.jpg   Givi DIY mounts-img_3175.jpg  
migrane is offline   Reply With Quote
 
Old April 23rd, 2017, 04:27 PM   #2
Member
 
Joined: Jul 2016
From: Ontario, Canada
Posts: 57

I Ride: 2005 749, 2015 Hyperstrada
so i decided to machine up some spacers ... they are not all cleaned up but I think these will do the trick ... check out the clearance

Migrane
Attached Thumbnails
Givi DIY mounts-img_3177.jpg   Givi DIY mounts-img_3178.jpg   Givi DIY mounts-img_3179.jpg  
migrane is offline   Reply With Quote
Old April 23rd, 2017, 06:32 PM   #3
Junior Member
 
Joined: Jun 2016
From: Australia
Posts: 19

I Ride: HS 821, SF 848
Why not just get the official Givi racks?

https://www.revzilla.com/motorcycle/...trada-939-2016
01101101 is offline   Reply With Quote
Old April 23rd, 2017, 07:46 PM   #4
Member
 
Joined: Jul 2016
From: Ontario, Canada
Posts: 57

I Ride: 2005 749, 2015 Hyperstrada
Quote:
Originally Posted by 01101101 View Post
Why not just get the official Givi racks?

https://www.revzilla.com/motorcycle/...trada-939-2016
https://www.revzilla.com/motorcycle/...16#fitment_tab

Seemingly fits only 939 ... i guess the followup question ... are the mounting points the same on the 821 ?

Migrane
migrane is offline   Reply With Quote
Old April 23rd, 2017, 08:22 PM   #5
Member
 
Joined: Jul 2016
From: Ontario, Canada
Posts: 57

I Ride: 2005 749, 2015 Hyperstrada
Quote:
Originally Posted by migrane View Post
https://www.revzilla.com/motorcycle/...16#fitment_tab

Seemingly fits only 939 ... i guess the followup question ... are the mounting points the same on the 821 ?

Migrane
Nothing on the Givi site for my MY15 for sidecases

https://giviusa.com/my-motorcycle/du...rada-821-13-15
migrane is offline   Reply With Quote
Old April 23rd, 2017, 09:29 PM   #6
Junior Member
 
Joined: Jun 2016
From: Australia
Posts: 19

I Ride: HS 821, SF 848
Only difference between 821 and 939 is that 939 has an oil cooler, different hand guards, larger muffler and Euro 4 engine. Other than that they're pretty much identical.

See here for someone who put the Givi mount on his 821:
Givi new DLM 30A side cases installed

I've also ordered the Givi rack for my own 821.
01101101 is offline   Reply With Quote
Old April 24th, 2017, 01:55 PM   #7
Member
 
Joined: Jul 2016
From: Ontario, Canada
Posts: 57

I Ride: 2005 749, 2015 Hyperstrada
Quote:
Originally Posted by 01101101 View Post
Only difference between 821 and 939 is that 939 has an oil cooler, different hand guards, larger muffler and Euro 4 engine. Other than that they're pretty much identical.

See here for someone who put the Givi mount on his 821:
Givi new DLM 30A side cases installed

I've also ordered the Givi rack for my own 821.
Please post some pics once you have yours mounted up ... Judging by all pics I've seen so far they've made the adapter plate stick out quite far from the original mounting points ( by my estimation about 40-50mm ) ... not sure why they did that seeing that the original bags are closer to the frame which one would think is a good thing from the perspective of drag. Also the bolt diameter remains the same but the spacers have increased the length 4-5 times. This presents a problem when loading the side cases ... Now that I think about it makes sense why they would state that its only for E22's which have a small load rating ... maybe I'm overthinking this ...

Migrane
migrane is offline   Reply With Quote
Old May 1st, 2017, 03:47 PM   #8
Member
 
Joined: Jul 2016
From: Ontario, Canada
Posts: 57

I Ride: 2005 749, 2015 Hyperstrada
So after looking for the original mounts and finding that everyone is sold out I decided to move on with making my own mounts and they are now done and as far as I can tell they are working nice ... I still have to go purchase all matching hardware bolts, washers and some loctite and clean them up ... I am thinking I am going with a brushed aluminum or black paint finish on them ... for now I am going to try the brushed aluminum since there is already a lot of black in the back there ... Here are some quick pics and I will take some more once everything has been buttoned up

Migrane
Attached Thumbnails
Givi DIY mounts-file_002.jpg   Givi DIY mounts-file_003.jpg   Givi DIY mounts-file_004.jpg  
migrane is offline   Reply With Quote
Old May 15th, 2017, 04:47 PM   #9
Member
 
Joined: Jul 2016
From: Ontario, Canada
Posts: 57

I Ride: 2005 749, 2015 Hyperstrada
So after doing some more riding with the bags on and with and without load I have settled on this and the mounts are performing great. I have put loctite on all of the bolts and outside of the fact that they dont look like much ... as my patience and finishing skills leave much to be desired they are very functional. I wanted to do another rendition in solid aluminum but there is no point to that ... they would be much too heavy. Attached are some final pics ...

Migrane
Attached Thumbnails
Givi DIY mounts-img_3215.jpg   Givi DIY mounts-img_3216.jpg   Givi DIY mounts-img_3217.jpg   Givi DIY mounts-img_3218.jpg  
migrane is offline   Reply With Quote
Old May 15th, 2017, 04:59 PM   #10
Senior Member
 
Joined: Jul 2014
From: California
Posts: 959

Looks cool. I've got a chunk of metal to make a rear rack for my hyper but havent had time to actually make it.
kuksul08 is offline   Reply With Quote
Reply

  Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Gear

Tags
diy, givi, mounts



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Givi mount Bellevue Ducati Givi mount Anfernee Gear 6 March 26th, 2017 09:20 AM
? Twist in Handlebar Mounts Andrewpar Mechanical and Technical 5 July 3rd, 2016 06:41 AM
Ducati Bellevue Givi Monokey Brackets and Givi e22 side cases peoples1234 Classifieds 0 November 5th, 2015 05:12 PM
Sound System and RAM Mounts Mbalducci1990 Mechanical and Technical 9 September 10th, 2014 09:27 AM
Givi monokey adapter Jamemoto Gear 22 May 21st, 2014 09:14 PM


Ducati Hyperstrada Facebook Ducati Hyperstrada Twitter Ducati Hyperstrada RSS Feed



Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.