Ducati Hyperstrada Forums Ducati Hyperstrada Motorcycle

Go Back   Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Gear

Gear Motorcycle Gear Forum - For motorcycle riding gear


Reply
 
LinkBack Thread Tools Display Modes
Old March 15th, 2017, 01:05 PM   #61
Senior Member
 
Joined: Jul 2014
From: California
Posts: 959

Quote:
Originally Posted by Devinjc View Post
I have a broken set that you can have, or at least I think I do. Some moron installed a givi top case on my bike and spaced going back and applying loctite on the givi support bolts after fitting everything and well, don't do that.

I think they could probably be repaired to handle a tail bag. I'll dig them out this weekend and snap a pic of the damage if your interested.
Heck yeah that'd be awesome.

RSL, I have a bag on my seat right now, but due to the short length it prevents rearward movement in the saddle. Explains why the rear rack is positioned so far back.

That looks like the Nelson Rigg tail pack you had. Is it the "sport" version? CL1060S?
kuksul08 is offline   Reply With Quote
 
Old March 15th, 2017, 01:22 PM   #62
RSL
Senior Member
 
RSL's Avatar
 
Joined: May 2015
From: Dallas, Texas
Posts: 802

I Ride: 2013 Hyperstrada
I have the discontinued Coretech and the small version of the nelson Rigg.

Link: Small Tail Bags - Bring a little stuff with you.
RSL is offline   Reply With Quote
Old July 12th, 2017, 05:28 PM   #63
Senior Member
 
Joined: Dec 2012
From: Nelson,BC
Posts: 103

I Ride: 2009 R1200RT/2013 Hyperstrada
Tailbag mount

A little late on this thread....I had mounted the rack and supporting rails for my old Givi V46 but found i did not need the large volume very often. So here's what i did earlier this summer to mount an old Marsee tail bag I've used on 3 other bikes.



There's a guy in our small town who is an aluminum fabricator who had the perfect sized 9" X 12" scrap he sold me for $5. I made a template for the mounting bolts on the grab rails from from 1/4" scrap plywood. I also figured out where the slots needed to be for the webbing of the tailbag. I marked the aluminum with a fine sharpie and drilled 7/16" holes for the grab bar mounting screws. For the slots I drilled 2 holes then used a metal blade in my jigsaw. I then used a fine file and a small diamond stone to round over all the edges. I then used some flat black Rustoleum to make it black!

The only thing I would differently is to make the forward slots for the webbing a little closer to the outside edges and 1/2" instead of 7/16".

Last edited by st2cmack; July 12th, 2017 at 06:20 PM. Reason: image link wrong
st2cmack is offline   Reply With Quote
Old July 13th, 2017, 05:15 AM   #64
Senior Member
 
Joined: Dec 2012
From: Nelson,BC
Posts: 103

I Ride: 2009 R1200RT/2013 Hyperstrada
Images for tailbag mount

Once again, hoperfully the images are here this time!
st2cmack is offline   Reply With Quote
Reply

  Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Gear

Tags
bags, tank



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Neverwet and the Hyperstrada bags porkrind Gear 9 November 7th, 2017 03:42 PM
Do you ride bags on or bags off? HyperstradaHopeful Ducati Hyperstrada 36 February 28th, 2017 07:28 AM
SW-MOTECH Tank Bags wildbill Gear 20 August 30th, 2015 09:05 AM
tank bags hyperjon Ducati Hyperstrada 22 March 20th, 2015 07:44 AM
luggage bags? twozzie Ducati Hyperstrada 4 June 24th, 2013 02:19 PM


Ducati Hyperstrada Facebook Ducati Hyperstrada Twitter Ducati Hyperstrada RSS Feed



Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.