Ducati Hyperstrada Forums Ducati Hyperstrada Motorcycle

Go Back   Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Gear

Gear Motorcycle Gear Forum - For motorcycle riding gear


Reply
 
LinkBack Thread Tools Display Modes
Old May 20th, 2014, 08:01 PM   #1
Member
 
Joined: May 2014
From: California
Posts: 46

Cool Multistrada Top Case?

I've been looking into getting a way to fit the Multistrada top case onto my Hyperstrada. It's bigger, solid, lockable to the same key as your bike, and a whole lot more convenient thanks to all that.

Anyone else out here interested? Anyone else here thought about it/tried it?
vincentgurle is offline   Reply With Quote
 
Old May 21st, 2014, 02:40 AM   #2
Senior Member
 
R6chase's Avatar
 
Joined: Mar 2013
From: New Brunswick, Canada
Posts: 282

A couple guys have. The bolt holes from the baseplate will fit rite on. Buy the hyperstrada support braces, drill a couple holes in the baseplate to make the whole unit stronger and you should be good to snap the multistrada case on you're bike. There are a couple threads on the site worth looking up including my top case build which I believe has part numbers for the braces you need
R6chase is offline   Reply With Quote
Old May 21st, 2014, 03:40 AM   #3
Senior Member
 
Joined: Jan 2014
From: Vietnam
Posts: 116

Quote:
Originally Posted by R6chase View Post
A couple guys have. The bolt holes from the baseplate will fit rite on. Buy the hyperstrada support braces, drill a couple holes in the baseplate to make the whole unit stronger and you should be good to snap the multistrada case on you're bike. There are a couple threads on the site worth looking up including my top case build which I believe has part numbers for the braces you need
Why not the Multistrada baseplate rather than Hyperstrada? ANy reason behind it?
ambientscape is offline   Reply With Quote
Old May 22nd, 2014, 02:01 AM   #4
Senior Member
 
R6chase's Avatar
 
Joined: Mar 2013
From: New Brunswick, Canada
Posts: 282

Top Case on my Hyperstrada

Here is my top case, essentially replace my aluminum plate with the multistrada base plate

Part numbers

Right support arm 87512001AA
Left support arm 87511991AA
Short spacer 71319991AA you need 2

And to replace the cap screws you need 2 M8x45 and 2 M8x40
Some M6 cap screws to hold the baseplate to the bike.
R6chase is offline   Reply With Quote
Old May 22nd, 2014, 02:03 AM   #5
Senior Member
 
R6chase's Avatar
 
Joined: Mar 2013
From: New Brunswick, Canada
Posts: 282

Givi monokey top case solution

This may be closer to what you're looking to do, the multi luggage is made by Givi
R6chase is offline   Reply With Quote
Old May 24th, 2014, 01:14 PM   #6
Member
 
Joined: May 2014
From: California
Posts: 46

Sweet! Thanks for all the replies - I've ordered the parts and am going to replace the top plate with the multistrada one.

Thanks again!
vincentgurle is offline   Reply With Quote
Old June 1st, 2014, 07:08 AM   #7
Senior Member
 
Joined: Dec 2012
From: Nelson,BC
Posts: 101

I Ride: 2009 R1200RT/2013 Hyperstrada
I recently installed the multi base plate on the Hyperstrada support arms to mount my old Givi V46 as R6chase suggested.

The Multi mounting plate came with the correct collared M6 screws for mounting to the HS arms. The only thing I did differently was to insert a couple of spacers between the plate and where it actually attaches to the support arms. The plate did not seem to seat quite right without the spacers. Oh yeah, this meant that the 2 capscrews that go through the plate and spacers(about 5mm worth)needed to be about that much longer than the ones that came with the Multi plate. Hope this makes sense!
st2cmack is offline   Reply With Quote
Reply

  Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Gear

Tags
case, multistrada, top



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Does the Multistrada's extra rear fender and extended chain guard work on the Hyper? HyperstradaHopeful Ducati Hyperstrada 30 August 3rd, 2014 11:29 AM
Top Case on my Hyperstrada R6chase Ducati Hyperstrada 18 March 18th, 2014 10:40 AM
Givi monokey top case solution HyperEA Mechanical and Technical 39 January 17th, 2014 11:11 AM
Hyperstrada mileage vs Multistrada SupermotoBoy Ducati Hyperstrada 19 August 31st, 2013 06:20 AM
Tope case broke left handle HyperEA Mechanical and Technical 10 July 9th, 2013 11:07 AM


Ducati Hyperstrada Facebook Ducati Hyperstrada Twitter Ducati Hyperstrada RSS Feed



Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.