Ducati Hyperstrada Forums Ducati Hyperstrada Motorcycle

Go Back   Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Mechanical and Technical

Mechanical and Technical Mechanical and technical topics, help, and discussions

LinkBack Thread Tools Display Modes
Old August 15th, 2017, 01:12 PM   #21
Senior Member
Joined: Jan 2015
From: Austria
Posts: 299

I Ride: 2016 Hyperstrada 939, red
nice price, need 2 new of them now.

at my 821 removing centerstand was no problem, the screws were no problem to unsrew.

next weekend i am on a 2 days trackday and so i wanted to unmount the centerstand of my new 939. wow, that was heavy and i had to use all tricks.
screws did not move a mm, hexagonsocket nearly ruined of the first one with electric impact wrench. no chance. then with heatgun and it opened slowly under lot of power.
so at the second one i used heatgun instantly, but no chance, ruined hexagonsocket.
then i hammered a larger torx into it and togehter with heat i could open it.
all 2 threads had a lot of red on it, actually the thread was completly red.
The new screws will never get loose by its own ;-).

good luck if you want to unmount your centerstand for any reason.

I will buy new ones and use them with light/blue loctite or without, the red one is a torture.
ferdi is online now   Reply With Quote

  Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Mechanical and Technical

center, screw, stand

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Center Stand Bolt Fell Off, Other stuff gatdammit Mechanical and Technical 5 September 29th, 2014 05:24 AM
Side Stand Foot DucRento Mechanical and Technical 7 March 24th, 2014 05:43 AM
Others having issue with side stand? Mayranf Mechanical and Technical 22 March 23rd, 2014 10:04 AM

Ducati Hyperstrada Facebook Ducati Hyperstrada Twitter Ducati Hyperstrada RSS Feed

Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.