Ducati Hyperstrada Forum

Ducati Hyperstrada Forum (http://hyperstrada.com/ducati-hyperstrada-forums.php)
-   Mechanical and Technical (http://hyperstrada.com/mechanical-technical/)
-   -   AltRider tail rack (http://hyperstrada.com/mechanical-technical/195-altrider-tail-rack.html)

Stradasphere May 4th, 2013 02:21 PM

AltRider tail rack
 
Well the Multistrada rack fits the Hyperstrada. Here are a few pictures of the AltRider tail rack

http://img.photobucket.com/albums/v2...pse3369b1e.jpg

http://img.photobucket.com/albums/v2...psa7c3dea3.jpg

jerdog53 May 4th, 2013 02:47 PM

I had been told that they would fit. I wonder if other things like foot pegs and water pump guard will also fit

SuperTen May 4th, 2013 03:17 PM

I'll be doggone! Found it in my junk in the garage, bolted right up! I pulled it off my Multi12 before selling the bike, thought I would build a mount in the future for some bike, never thought it would bolt right up to a different one!

This is my 36L Givi, think the Duc one is 31L. I have 3 holes drilled so I can move the topcase forward or back, this is the front mount, or stock from Alt_rider.

http://myweb.cebridge.net/dhanson/Alt_strada.jpg
http://myweb.cebridge.net/dhanson/Alt_strada2.jpg

P.S. Okay, looks like they changed it some, mine was one of the first batch (2010 Multi12) and the topcase was too close for 2up, I had to move the mounts back about 2-1/2" IIRC.
http://myweb.cebridge.net/dhanson/Alt_strada3.jpg

Stradasphere May 4th, 2013 04:09 PM

Looks like that just saved you a few bucks ;)

SuperTen May 4th, 2013 04:23 PM

Exactly, not to mention the instant ability to swap my topcase between the bikes.

Oh, and Thanks!

jerdog53 June 24th, 2013 07:20 AM

Speaking of ALT rider
 
I'll post this over here as well.


This is Multistrada 1200 parts obviously because no one currently lists parts for the Hyperstrada. Well they fit as I suspected and I’m glad for it!

http://i197.photobucket.com/albums/a...n/IMG_0578.jpg


http://i197.photobucket.com/albums/a...n/IMG_0579.jpg



I will probably do the radiator guard and tail rack next.

GTHawk June 25th, 2013 05:42 AM

quick question, dose the plate have a reinforcing equipment. I know the givi racks have a extra piece to reinforce the stock grab rails. I ask as I know one member did not install the extra bar and ended up breaking the stock rails

mentalist June 25th, 2013 06:18 AM

Quote:

Originally Posted by GTHawk (Post 2934)
quick question, dose the plate have a reinforcing equipment. I know the givi racks have a extra piece to reinforce the stock grab rails. I ask as I know one member did not install the extra bar and ended up breaking the stock rails

+1

jerdog53 June 25th, 2013 06:23 AM

I bet they dont....

Stradasphere June 25th, 2013 07:32 PM

I bought the one for the Multistrada and it did not come with any reinforcing. I don't carry a lot of weight in my tail bag so I don't expect problems.

Stradasphere June 25th, 2013 07:34 PM

Quote:

Originally Posted by jerdog53 (Post 2909)
I'll post this over here as well.


This is Multistrada 1200 parts obviously because no one currently lists parts for the Hyperstrada. Well they fit as I suspected and I’m glad for it!


http://i197.photobucket.com/albums/a...n/IMG_0579.jpg



I will probably do the radiator guard and tail rack next.

Were you able to install the pump guard with out coolant loss? I have been debating if I should put a pump guard on and remove the frame slider. I don't like the looks of the frame slider.

mentalist June 25th, 2013 11:49 PM

Quote:

Originally Posted by Stradasphere (Post 2953)
Were you able to install the pump guard with out coolant loss? I have been debating if I should put a pump guard on and remove the frame slider. I don't like the looks of the frame slider.

the guard fits over the top of the original pump housing, you don't have to remove all the securing bolts, so providing the bike is cool and no pressure in the system, there shouldn't be any coolant loss.

jerdog53 June 27th, 2013 06:32 AM

That is correct no coolant loss...

abcde April 21st, 2014 03:57 AM

Quote:

Originally Posted by jerdog53 (Post 1642)
I had been told that they would fit. I wonder if other things like foot pegs and water pump guard will also fit

Anyone using Hepco rack for Multi12 on HS?

The gap between seat & rack seem closer & tighter.

It may or may not be able to remove seat after installing rack & top case.

Thank for reading


All times are GMT -8. The time now is 07:39 PM.


Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.