Ducati Hyperstrada Forums Ducati Hyperstrada Motorcycle

Go Back   Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Mechanical and Technical

Mechanical and Technical Mechanical and technical topics, help, and discussions


Reply
 
LinkBack Thread Tools Display Modes
Old June 6th, 2015, 05:51 AM   #1
Member
 
Joined: May 2014
From: Austria
Posts: 62

I Ride: Hyperstrada 2013 \ SV650 S K03
Exclamation Rear suspension reservior screw came off

Hello riders

Today i made a short trip in our mountains and at a short rest
ive seen that the screw from the holder of the rear suspension reservoir
came off.

The reservoir was hanging beetween the spring coils .

This screw is mounted upside down, so please control it on your motorcycles.

Im not sure if the reservoir has any damages, because i had a little hurry after the tour.
Ive seen that the spring has some scratches.


In the same time Ive seen, that the cable from the exhaust flapper valve,
has no mounting point on the exhaust any more ?

Now its rattling on the exhaust pipe.

Is there a mounting point,
beneath the mounting point at the brake reservoir ?

Will see if i can make some fotos tommorow.

Thanks
wbr SH
silenthunter is offline   Reply With Quote
 
Old June 6th, 2015, 08:34 AM   #2
Senior Member
 
Jokeshopbeard's Avatar
 
Joined: Jan 2015
From: London
Posts: 330

I Ride: Hyperstrada, Transalp & Fireblade
Be sure to get those photos up; it's very hard to conceptualize the description in words..
Jokeshopbeard is offline   Reply With Quote
Old June 6th, 2015, 01:29 PM   #3
Senior Member
 
zippy49's Avatar
 
Joined: Nov 2013
From: Inland SoCal
Posts: 1,065

I Ride: anything I can get my hands on
Happened to me, too. I lost the little nut that the screw goes into, had to find a replacement. Loctited it. No leaks yet...
It's the same plastic bracket that holds the rear power outlet.

PS you can turn the spring to hide the scratches...

Last edited by zippy49; June 6th, 2015 at 02:19 PM. Reason: PS
zippy49 is offline   Reply With Quote
Old June 7th, 2015, 09:25 AM   #4
Member
 
Joined: May 2014
From: Austria
Posts: 62

I Ride: Hyperstrada 2013 \ SV650 S K03
So now i took pics.

In the middle of img 1237 you see the screw that came off the reservoir.
In 1247 you can see the scratches the reservoir made at the spring.

1239 is the cable to the flapper valve, which rattles at the exhaust pipe holder.
1241 would be the upper cable @ the brake reservoir, where the only holder for this cable is.
Here Im not sure if the cable path is right, or if there should be another holder ?
Because this rattling sound is irritating.

Does anybody know if theres a mounting point,
for the cable to the flapper valve, below the one @ the brake reservoir (last pic)?

And thanks zippy i knew that, also used an anticorrosive paint.

Thanks
WBR
SH
Attached Thumbnails
Rear suspension reservior screw came off-img_1237.jpg   Rear suspension reservior screw came off-img_1247.jpg   Rear suspension reservior screw came off-img_1239.jpg   Rear suspension reservior screw came off-img_1241.jpg  

Last edited by silenthunter; June 8th, 2015 at 07:50 AM.
silenthunter is offline   Reply With Quote
Reply

  Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Mechanical and Technical

Tags
rear, reservior, screw, suspension



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
The Suspension Thread!!! BOOING Strider Mechanical and Technical 230 October 14th, 2018 09:17 AM
Center stand screw silenthunter Mechanical and Technical 20 August 15th, 2017 01:12 PM
Rear suspension adjustment Jamemoto Mechanical and Technical 3 August 12th, 2014 08:21 AM
Rear Suspension adjustment? ChrisHyper Mechanical and Technical 2 July 24th, 2014 08:36 AM
About to pull the trigger...Suspension worries dlbracey Ducati Hyperstrada 31 April 28th, 2014 05:42 PM


Ducati Hyperstrada Facebook Ducati Hyperstrada Twitter Ducati Hyperstrada RSS Feed



Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.