Ducati Hyperstrada Forums Ducati Hyperstrada Motorcycle

Go Back   Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Mechanical and Technical

Mechanical and Technical Mechanical and technical topics, help, and discussions


Reply
 
LinkBack Thread Tools Display Modes
Old March 22nd, 2017, 03:09 AM   #1
Member
 
Joined: Oct 2016
From: Vietnam
Posts: 31

Swap ECU & problems !!

Hi,
I have a question about "swap ECU". My hyperstrada got fault of ECU ("CAN LINE" again after I repaired my dashboard successfully), so I got an ECU from my friend (hyperstrada), then swap on my bike, but nothing happen, the bike don't recognize ECU !
Anyone give me a ắner, solution... about this ?

Thank you very much,

Sorry for my bad English!
cubizme is offline   Reply With Quote
 
Old March 22nd, 2017, 06:10 AM   #2
Senior Member
 
Joined: Jan 2015
From: Austria
Posts: 275

I Ride: 2016 Hyperstrada 939, red
Quote:
Originally Posted by cubizme View Post
Hi,
I have a question about "swap ECU". My hyperstrada got fault of ECU ("CAN LINE" again after I repaired my dashboard successfully), so I got an ECU from my friend (hyperstrada), then swap on my bike, but nothing happen, the bike don't recognize ECU !
Anyone give me a ắner, solution... about this ?

Thank you very much,

Sorry for my bad English!
i have a spare ECU for my 821 and swapping ECU is possible. It looks quite fine after ECUs get swapped, bike is starting and running normal.
also my dealer did nothing else than swapping ECU when he updated software on my spare ECU. bike started immediatly after swapping, each time.
so i suppose your bike has another problem also, if frineds ECU works in his bike.
ferdi is offline   Reply With Quote
Old March 22nd, 2017, 06:39 AM   #3
Senior Member
 
Joined: Feb 2014
From: TN
Posts: 229

Quote:
Originally Posted by ferdi View Post
i have a spare ECU for my 821 and swapping ECU is possible. It looks quite fine after ECUs get swapped, bike is starting and running normal.
also my dealer did nothing else than swapping ECU when he updated software on my spare ECU. bike started immediatly after swapping, each time.
so i suppose your bike has another problem also, if frineds ECU works in his bike.
Quote:
Originally Posted by cubizme View Post
Hi,
I have a question about "swap ECU". My hyperstrada got fault of ECU ("CAN LINE" again after I repaired my dashboard successfully), so I got an ECU from my friend (hyperstrada), then swap on my bike, but nothing happen, the bike don't recognize ECU !
Anyone give me a ắner, solution... about this ?

Thank you very much,

Sorry for my bad English!
If this is the case, does your ECU work in your friends bike?
dragoontwo is offline   Reply With Quote
Old March 22nd, 2017, 08:34 AM   #4
Senior Member
 
zippy49's Avatar
 
Joined: Nov 2013
From: Inland SoCal
Posts: 1,030

I Ride: anything I can get my hands on
Check your ground connections. Our 390 Duke would crank but not fire because of this. Also, have you had the Canbus filter TSB done?
zippy49 is offline   Reply With Quote
Old March 22nd, 2017, 05:15 PM   #5
Member
 
Joined: Oct 2016
From: Vietnam
Posts: 31

Quote:
Originally Posted by ferdi View Post
i have a spare ECU for my 821 and swapping ECU is possible. It looks quite fine after ECUs get swapped, bike is starting and running normal.
also my dealer did nothing else than swapping ECU when he updated software on my spare ECU. bike started immediatly after swapping, each time.
so i suppose your bike has another problem also, if frineds ECU works in his bike.
Glad to hear, but my case didn't work, also my friend's bike working normally!

Quote:
Originally Posted by dragoontwo View Post
If this is the case, does your ECU work in your friends bike?
My ecu doesn't work in my friend's bike ( the dash show "CAN LINE") .

Quote:
Originally Posted by zippy49 View Post
Check your ground connections. Our 390 Duke would crank but not fire because of this. Also, have you had the Canbus filter TSB done?
I checked ground connection, and all of wire, they are fine ! I haven't installed CAN filter yet !
cubizme is offline   Reply With Quote
Old March 22nd, 2017, 10:49 PM   #6
Senior Member
 
zibbit u2's Avatar
 
Joined: Jan 2015
From: Victoria BC Canada
Posts: 455

I Ride: 04 WR450 Supermoto, and 13 Hyperstrada
I bet it has something to do with the immobilizer system on the bike. The Key, ECU and dash all need to be programmed to recognize each other. I would say your best bet would be to visit a dealer so you can use their special Ducati computers.
zibbit u2 is offline   Reply With Quote
Old March 23rd, 2017, 01:06 AM   #7
Senior Member
 
Joined: Jan 2015
From: Austria
Posts: 275

I Ride: 2016 Hyperstrada 939, red
Quote:
Originally Posted by zibbit u2 View Post
I bet it has something to do with the immobilizer system on the bike. The Key, ECU and dash all need to be programmed to recognize each other. I would say your best bet would be to visit a dealer so you can use their special Ducati computers.
no, the ecu does not be programmed to be recognized, just switch and go
ferdi is offline   Reply With Quote
Old March 25th, 2017, 12:49 AM   #8
Member
 
Joined: Oct 2016
From: Vietnam
Posts: 31

Quote:
Originally Posted by zibbit u2 View Post
I bet it has something to do with the immobilizer system on the bike. The Key, ECU and dash all need to be programmed to recognize each other. I would say your best bet would be to visit a dealer so you can use their special Ducati computers.
Quote:
Originally Posted by ferdi View Post
no, the ecu does not be programmed to be recognized, just switch and go
I forget one thing, my friend's ecu is Italy version, mine is Thailand version. Is this problem??
cubizme is offline   Reply With Quote
Old March 25th, 2017, 12:57 AM   #9
Senior Member
 
Joined: Jan 2015
From: Austria
Posts: 275

I Ride: 2016 Hyperstrada 939, red
Quote:
Originally Posted by cubizme View Post
I forget one thing, my friend's ecu is Italy version, mine is Thailand version. Is this problem??
maybe, but i do'nt think so.

my guess is, that your dashboard is also faulty (again)
ferdi is offline   Reply With Quote
Old March 25th, 2017, 04:19 PM   #10
Member
 
Joined: Oct 2016
From: Vietnam
Posts: 31

Quote:
Originally Posted by ferdi View Post
maybe, but i do'nt think so.

my guess is, that your dashboard is also faulty (again)
Thank ferdi, I am finding an used ECU for my bike
cubizme is offline   Reply With Quote
Reply

  Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Mechanical and Technical

Tags
ecu, problems, swap



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
All sorts of problems Braaap Ducati Hyperstrada 10 June 10th, 2014 04:53 AM
Starting Problems ?? paulquinnq6 Ducati Hyperstrada 5 October 24th, 2013 06:01 AM
ECU Problems and updates Frank Rizzo Ducati Hyperstrada 33 October 22nd, 2013 07:18 PM
Body work swap anyone? TheFirerider Ducati Hyperstrada 0 August 20th, 2013 01:28 PM


Ducati Hyperstrada Facebook Ducati Hyperstrada Twitter Ducati Hyperstrada RSS Feed



Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.