Ducati Hypermotard 821 clutch fix - the definitive guide - Page 7

Araitim · January 2nd, 2018, 02:15 PM

Monocog007, please do let me know. I appreciate it.

Quote:

Originally Posted by kuksul08

That's normal. The way they make that plate is they take a regular friction plate and remove the inside diameter using a lathe, hence why it's called a "turned friction plate". So the edge of the pads gets chewed up as the cutting tool chips away at it.

I was a little skeptical at first but it makes sense. The factory confirmed that this was the case. What I did is wipe off the loose fibers and installed it.

I will say I don't think mine was quite as rough. Maybe half as much or so. It's possible yours got jostled around in shipping and broke more fibers loose?

Kuksul08, this makes alot of sense, the lathe turned friction plate. Turning the disc could likely cause the material to chip away. Excellent point.

monocog007 · January 2nd, 2018, 05:05 PM

Quote:

Originally Posted by Araitim

Monocog007, please do let me know. I appreciate it.

I can confirm mine looks the same. There was some light shavings in the bag, and the ring looked exactly like kuksul08 mentions, with lathe marks in the inside.

Araitim · January 7th, 2018, 10:48 AM

I spoke with the seller. He was very helpful and offered to replace the friction plate. Ultimately in the end I decided to keep it. Worse case scenario I'll throw another disc on the lathe and make a new one. The judder spring was the main piece I was needing. But, as most have said, it probably will not be an issue.

Araitim · January 10th, 2018, 06:52 PM

I admit I am a slow learner but, kuksul08, are these your kits?

I have an additional question, is everyone using the 4 spring spacers?

kuksul08 · January 10th, 2018, 07:22 PM

Quote:

Originally Posted by Araitim

I admit I am a slow learner but, kuksul08, are these your kits?

I have an additional question, is everyone using the 4 spring spacers?

I contacted the seller and got him to source the parts for us and arranged the group purchase, but no they are not made by me. My parts are the auxiliary lights and instrument panel protectors.

The spacers.. I used them, but I don't think it really matters. Up to you.

Araitim · January 11th, 2018, 03:35 AM

Quote:

Originally Posted by kuksul08

I contacted the seller and got him to source the parts for us and arranged the group purchase, but no they are not made by me. My parts are the auxiliary lights and instrument panel protectors.

The spacers.. I used them, but I don't think it really matters. Up to you.

Fantastic. Thank you for all your help!

zippy49 · January 22nd, 2018, 09:04 AM

Quote:

Originally Posted by kuksul08

I contacted the seller and got him to source the parts for us and arranged the group purchase, but no they are not made by me. My parts are the auxiliary lights and instrument panel protectors.

The spacers.. I used them, but I don't think it really matters. Up to you.

Is there a chance that your vendor could continue to import these kits? I sure love mine, and I'm confident that more of them would sell.

kuksul08 · January 22nd, 2018, 12:39 PM

Quote:

Originally Posted by zippy49

Is there a chance that your vendor could continue to import these kits? I sure love mine, and I'm confident that more of them would sell.

Yeah around May he will have a bunch more.

st2cmack · February 3rd, 2018, 07:01 AM

I ordered some 3mm rod from Ebay as it seems to be the only place i can find it. Unfortunately it's coming from fricking China and has not yet arrived(8 weeks later!!!). Has anyone found a source that actually ships from the USA?

TIA
Colin

kuksul08 · February 3rd, 2018, 07:22 AM

McMaster-carr and you'll have it next day

February 3rd, 2018, 07:01 AM	#69
st2cmack Senior Member Joined: Dec 2012 From: Nelson,BC Posts: 135 I Ride: 2009 R1200RT/2013 Hyperstrada	still waiting on 3mm rod I ordered some 3mm rod from Ebay as it seems to be the only place i can find it. Unfortunately it's coming from fricking China and has not yet arrived(8 weeks later!!!). Has anyone found a source that actually ships from the USA? TIA Colin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hyperstrada/Hypermotard Ducati Performance Alarm	ohayo	Mechanical and Technical	18	May 17th, 2017 03:28 PM
FS: Hypermotard / Hyperstrada Seats Ducati Performance Low and OEM	crazyinp	Classifieds	4	August 17th, 2016 09:41 PM
Hyper 821 Touring seat - Top Case - side tankpad - clutch cable - clutch lever rizoma	silenthunter	Classifieds	1	May 26th, 2016 09:01 PM
For Sale: Ducati Hypermotard/Hyperstrada Racing Seat	peoples1234	Classifieds	5	February 3rd, 2016 05:40 AM
Lightech Rearsets Ducati Hyperstrada 821 / Hypermotard 821	cosmickites	Mechanical and Technical	30	October 19th, 2015 05:24 PM

January 7th, 2018, 10:48 AM	#63
Araitim Senior Member Joined: Sep 2017 From: Lansing Mi Posts: 140 I Ride: 2013 hypermotard/hyperstrada, 2005 zx6r, drz125, crf50 crf70	I spoke with the seller. He was very helpful and offered to replace the friction plate. Ultimately in the end I decided to keep it. Worse case scenario I'll throw another disc on the lathe and make a new one. The judder spring was the main piece I was needing. But, as most have said, it probably will not be an issue.

January 10th, 2018, 06:52 PM	#64
Araitim Senior Member Joined: Sep 2017 From: Lansing Mi Posts: 140 I Ride: 2013 hypermotard/hyperstrada, 2005 zx6r, drz125, crf50 crf70	I admit I am a slow learner but, kuksul08, are these your kits? I have an additional question, is everyone using the 4 spring spacers?

February 3rd, 2018, 07:22 AM	#70
kuksul08 Senior Member Joined: Jul 2014 From: California Posts: 1,158	McMaster-carr and you'll have it next day

ducati hyperstrada clutch