Ducati Hyperstrada Forums Ducati Hyperstrada Motorcycle

Go Back   Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Mechanical and Technical

Mechanical and Technical Mechanical and technical topics, help, and discussions


Reply
 
LinkBack Thread Tools Display Modes
Old August 23rd, 2018, 03:31 AM   #1
DDM
Junior Member
 
Joined: Aug 2018
From: NL
Posts: 3

Who wants to send me an unbeloved part

Hi all, new member. I've bought a 2014 HM 821SP and the PO took out the actual disc/plate/flapper from the servo shaft in the exhaust. I've combined some parts to form a cool exhaust but it is very loud as expected. I want to re-enable the flapper valve in the exhaust and I'm in the process of getting the right equipment and software definition to adjust the settings of how the flapper behaves myself. this way I can profit from the additional silencing it brings at low throttle conditions like highway cruise and idle/slow takeoff.

Now I'm able to measure the stuff and get one laser cut myself but I'm lazy. Did someone delete the servo or inactivate it and want to send/sell me their plate? I checked ETKA but it isn't a separate part that is sold. Here is a picture of the exhaust result and first gen hyper handguards install.
Attached Thumbnails
Who wants to send me an unbeloved part-img-20180818-wa0007.jpg   Who wants to send me an unbeloved part-img-20180818-wa0021.jpg  
DDM is offline   Reply With Quote
 
Old August 23rd, 2018, 07:43 AM   #2
Senior Member
 
gatdammit's Avatar
 
Joined: Mar 2013
From: Naples, IT
Posts: 2,032

I Ride: 2013 White Strada
I think they mostly get destroyed when removing. You have to grind off the rivets that hold the plate, which might be salvaged. I think you have to cut the ends of the shaft that moves the butterfly, too.

But I think you'll find, after taking a cutting tool to something you don't want, probably not many that keep the pieces.
gatdammit is offline   Reply With Quote
Old August 26th, 2018, 02:05 PM   #3
DDM
Junior Member
 
Joined: Aug 2018
From: NL
Posts: 3

Anyone?
DDM is offline   Reply With Quote
Old August 30th, 2018, 12:27 PM   #4
DDM
Junior Member
 
Joined: Aug 2018
From: NL
Posts: 3

Anyone care to make a good picture of the plate fitted and maybe the exact diameter? Ultimately cool would be to take the muffler off and close the valve manually and start the bike to tell me if it makes a lot of difference open or closed without muffler... Because that's pretty much my exhaust setup lol
DDM is offline   Reply With Quote
Reply

  Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Mechanical and Technical

Tags
part, send, unbeloved



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Video Review - Part 3 (The Touring Review) phil808 Ducati Hyperstrada 6 October 13th, 2016 12:13 PM
939 Video Review (Part 2) phil808 Ducati Hyperstrada 8 September 18th, 2016 11:20 AM
Ducati Performance hand guard part numbers Whiteone Mechanical and Technical 3 September 13th, 2016 07:36 PM
Clutch micro switch part #? astrocortex Mechanical and Technical 4 July 11th, 2016 04:17 PM


Ducati Hyperstrada Facebook Ducati Hyperstrada Twitter Ducati Hyperstrada RSS Feed



Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.