Ducati Hyperstrada Forums Ducati Hyperstrada Motorcycle

Go Back   Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Mechanical and Technical

Mechanical and Technical Mechanical and technical topics, help, and discussions


Reply
 
LinkBack Thread Tools Display Modes
Old July 29th, 2014, 02:27 PM   #1
Member
 
Petta's Avatar
 
Joined: Mar 2014
From: Czech rep.
Posts: 40

I Ride: Ducati Hyperstrada
14T front sprocket

Hello.

Is a problem with 14T front sprocket for Hyperstrada?

Or it works good?

I had problems with rev limiter.. Is it possible?

Do you have 14T front sprocket?

Thanks.
Petta is offline   Reply With Quote
 
Old July 29th, 2014, 02:50 PM   #2
Member
 
Joined: Mar 2014
From: France
Posts: 46

Do you plan to climb trees with your bike?
niiico is offline   Reply With Quote
Old July 29th, 2014, 03:12 PM   #3
Member
 
Petta's Avatar
 
Joined: Mar 2014
From: Czech rep.
Posts: 40

I Ride: Ducati Hyperstrada
witty..
Petta is offline   Reply With Quote
Old July 30th, 2014, 12:00 AM   #4
Member
 
Joined: Mar 2014
From: France
Posts: 46

Ok, seriously, there should be no pb to mount a 14T front sprocket. What do you call "pb with rev limiter"?
niiico is offline   Reply With Quote
Old July 30th, 2014, 12:03 AM   #5
Member
 
Joined: Mar 2014
From: France
Posts: 46

This table may interest you :
niiico is offline   Reply With Quote
Old July 30th, 2014, 12:04 AM   #6
Member
 
GuyW's Avatar
 
Joined: May 2013
From: Sydney, Australia
Posts: 50

I Ride: Hyperstrada
I have installed a 14t sprocket as I found it too highly geared. It revs about 7% faster but unless you plan on revving it out in top gear it should not cause a problem. I did not notice any increase in Fuel consumption.
GuyW is offline   Reply With Quote
Old July 30th, 2014, 12:10 AM   #7
Member
 
Joined: Mar 2014
From: France
Posts: 46

Or this one :
niiico is offline   Reply With Quote
Old July 30th, 2014, 01:08 AM   #8
Member
 
Petta's Avatar
 
Joined: Mar 2014
From: Czech rep.
Posts: 40

I Ride: Ducati Hyperstrada
The problem with 14T sprocket:

1st gear max. 8500 rpm
2nd gear max. 9000 rpm
3rd - 6th gear was all ok, max. 10500 rpm.

I dont know, how you call rpm limiter??

Now, with 15T is all ok. I dont know, where is the problem..

Maybe will be ok with 14-47?
Petta is offline   Reply With Quote
Old July 30th, 2014, 01:11 AM   #9
Member
 
Petta's Avatar
 
Joined: Mar 2014
From: Czech rep.
Posts: 40

I Ride: Ducati Hyperstrada
Quote:
Originally Posted by GuyW View Post
I have installed a 14t sprocket as I found it too highly geared. It revs about 7% faster but unless you plan on revving it out in top gear it should not cause a problem. I did not notice any increase in Fuel consumption.
Thanks. And max rpm on 1st and 2nd gear??
Petta is offline   Reply With Quote
Old July 30th, 2014, 06:26 AM   #10
Member
 
Joined: Mar 2014
From: France
Posts: 46

Never heard about a different rpm limit depending on the gear...
niiico is offline   Reply With Quote
Reply

  Ducati Hyperstrada Forum > Ducati Hyperstrada Forum > Mechanical and Technical

Tags
14t, front, sprocket



Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Speedometer is off big time after changing front sprocket to 14T HyperstradaHopeful Ducati Hyperstrada 25 July 28th, 2015 02:04 PM
Front Sprocket Nut Size? krolinked Ducati Hyperstrada 5 July 23rd, 2014 01:30 PM
Will this sprocket fit the Hyperstrada? HyperstradaHopeful Ducati Hyperstrada 0 January 14th, 2014 10:16 PM
Where to buy a 14T sprocket? HyperstradaHopeful Ducati Hyperstrada 0 January 14th, 2014 06:54 PM
Changing the rear sprocket StefanR Mechanical and Technical 15 January 1st, 2014 08:35 AM


Ducati Hyperstrada Facebook Ducati Hyperstrada Twitter Ducati Hyperstrada RSS Feed



Ducati Hyperstrada Motorcycle Forum
Copyright © 2012-2014 HYPERSTRADA.COM • All rights reserved.