HyperProject

Dec 2017
12
0
USA
Thanks for the info. Yeah I may do the K-Tech cartridges, I have a bunch of friends who run their product on the track and hear nothing but good things. Did you end up doing the anti-judder upgrade on the clutch? I missed out on the last eBay kit.
 
Feb 2017
232
0
Washington, DC
I have those same Mupo K-911 carts in my stock Srada forks. They had to do some type of fork modification but boy what a difference they make. I put an Ohlins TTX36 in the rear.
 

Attachments

Last edited:
Sep 2016
341
1
ABQ NM
...I may do the K-Tech cartridges, I have a bunch of friends who run their product on the track and hear nothing but good things. Did you end up doing the anti-judder upgrade on the clutch? I missed out on the last eBay kit.
I haven't put the spring in yet but I'm going to.

On the cartridges, it doesn't matter who does the if you are putting them in both sides, you probably have to machine the lower bracket (brake caliper bolts to) to accommodate the the rod end that protrudes down there. Heads up...
 
Sep 2016
341
1
ABQ NM
Brake Light Modulator (brake blinker)

OK, finally back onto the bike some. Bought a HealTech Brake Light Pro programmable brake light flasher (BLP-UO1) and didn't want to use the crappy pinch splices that came with it.

First I found the connector 2and unplugged them.
Then I bought some exact replacement connectors and pins. JWPF series and Digikey has them.
-03T-JWPF-VSLE-S - 3 position connector, tab side (male side)
-03R-JWPF-VSLE-S - 3 position connector, receptacle (female side)
-SWPR-001T-P025 - pin, socket side
-SWPT-001T-P025 - pin, male side

So I make a plugin harness out of the flasher unit using these connectors. Some free advice if you play with these connectors, listen to the Digikey vids on it and buy extras of everything, they're cheap. Also, stuffing the silicon plug into the back isn't as easy as it looks when done. The wire gauge that came with the unit were a tad big for the pin crimps, I trimmed the excess strands and it worked the first time. I need to draw up a wiring diagram to post.
 

Attachments

Last edited:
Oct 2015
545
0
Minnesota
OK, ginned up a quick and simple wiring diagram in PowerPoint. If you're wondering why I have red for the jumper when it probably should be yellow, it's because that's what I had, not what I wanted.
Very nice! Yeah anytime you can avoid cutting into a factory harness, it's a good idea. The cruise control unit I used to have had a piggyback connector off the rear tail light to get an ignition switched 12v. Looked similar to what you have created, just with a different wire.
 
Sep 2016
341
1
ABQ NM
That cruise control is on my To Do List, right after the gear indicator and pivoting rear brake pedal mod. and the exhaust valve elimination mod.

Then upgrading the shifter with Factory Pro parts I just ordered and the judder spring clutch fix.

THEN I upgrade the air intake and THEN I need to find me a new reflash map for my stock computer that will work with my new intake and exhaust mods....

It's an addiction really.... :-I
 
Last edited: